Researchers have produced smart textiles that snugly conform to the body so they can sense the wearer’s posture and motions. By incorporating a special type of plastic yarn and using heat to slightly melt it—a process called thermoforming—researchers at the Massachusetts Institute of Technology (MIT) were able to greatly improve the precision of pressure sensors woven into multilayered knit textiles, which they call 3DKnITS.
The fabrication process: The MIT researchers used this process to create a “smart” shoe and mat, and then built a hardware and software system to measure and interpret data from the pressure sensors in real time.
- The machine-learning system predicted motions and yoga poses performed by an individual standing on the smart textile mat with about 99 percent accuracy.
- Their fabrication process, which takes advantage of digital knitting technology, enables rapid prototyping and can be easily scaled up for large-scale manufacturing.
- The technique could have many applications, especially in health care and rehabilitation. It could be used to produce smart shoes that track the gait of someone who is learning to walk again after an injury, or socks that monitor pressure on a diabetic patient’s foot to prevent the formation of ulcers.
The researchers: Irmandy Wicaksono, a research assistant in the MIT Media Lab, was the lead author of a paper presenting this 3DKnITS
- Wicaksono wrote the paper with MIT undergraduate students Peter G Hwang, Samir Droubi and Allison N Serio through the Undergraduate Research Opportunities Program; Franny Xi Wu, a recent graduate of the Wellesley College; Wei Yan, assistant professor at the Nanyang Technological University; and senior author Joseph A Paradiso, the Alexander W Dreyfoos Professor and director of the Responsive Environments group within the Media Lab.
- The research will be presented at the IEEE Engineering in Medicine and Biology Society Conference.
How they did it:
- To produce a smart textile, the researchers use a digital knitting machine that weaves together layers of fabric with rows of standard and functional yarn. The multilayer knit textile is composed of two layers of conductive yarn knit sandwiched around a piezoresistive knit, which changes its resistance when squeezed.
- Following a pattern, the machine stitches this functional yarn throughout the textile in horizontal and vertical rows. Where the functional fibres intersect, they create a pressure sensor.
- But yarn is soft and pliable, so the layers shift and rub against each other when the wearer moves. This generates noise and causes variability that make the pressure sensors much less accurate.
Overcoming the hurdle: Wicaksono came up with a solution to this problem while working in a knitting factory in Shenzhen, China, where he spent a month learning to programme and maintain digital knitting machines.
- He watched workers making sneakers using thermoplastic yarns that would start to melt when heated above 70 degrees Celsius, which slightly hardens the textile so it can hold a precise shape.
- He decided to try incorporating melting fibers and thermoforming into the smart textile fabrication process. “The thermoforming really solves the noise issue because it hardens the multilayer textile into one layer by essentially squeezing and melting the whole fabric together, which improves the accuracy. That thermoforming also allows us to create 3D forms, like a sock or shoe, that actually fit the precise size and shape of the user,” he says.
- Once he perfected the fabrication process, Wicaksono needed a system to accurately process pressure sensor data. Since the fabric is knit as a grid, he crafted a wireless circuit that scans through rows and columns on the textile and measures the resistance at each point.
- He designed this circuit to overcome artifacts caused by “ghosting” ambiguities, which occur when the user exerts pressure on two or more separate points simultaneously.
- Inspired by deep-learning techniques for image classification, Wicaksono devised a system that displays pressure sensor data as a heat map. Those images are fed to a machine-learning model, which is trained to detect the posture, pose, or motion of the user based on the heat map image.
Analysing activities
- Once the model was trained, it could classify the user’s activity on the smart mat (walking, running, doing push-ups, etc.) with 99.6% accuracy and could recognise seven yoga poses with 98.7% accuracy.
- They also used a circular knitting machine to create a form-fitted smart textile shoe with 96 pressure sensing points spread across the entire 3D textile.
- They used the shoe to measure pressure exerted on different parts of the foot when the wearer kicked a soccer ball.
- The high accuracy of 3DKnITS could make them useful for applications in prosthetics, where precision is essential.
- A smart textile liner could measure the pressure a prosthetic limb places on the socket, enabling a prosthetist to easily see how well the device fits, Wicaksono says.
- With digital knitting, you have this freedom to design your own patterns and also integrate sensors within the structure itself, so it becomes seamless and comfortable, and you can develop it based on the shape of your body.
