Deadline Panic Is No Excuse for Sewing Untested Parts into Finished Garments

Ukrainian textile manufacturers have had to work under exceptional supply uncertainty, in which availability can become the first test a component must pass. Yevhen Hodovaniuk, Commercial Director at Delim, discusses how alternatives can be documented before a disruption strikes, why quick availability is no proof of suitability and what evidence a credible qualification process for substitutes should record.

Long Story, Cut Short
  • Nominal size, colour and material name narrow the search but do not identify mating geometry, installation or service conditions.
  • A component-strength value does not necessarily describe how strongly that component is attached to the surrounding fabric or webbing.
  • Where the necessary evidence is unavailable, approval should be withheld rather than relaxed because supply has become urgent.
When supply falters, availability can become the first test a part must pass, but speed of delivery offers no assurance that it will perform as intended.
PRESSURED CHOICES When supply falters, availability can become the first test a part must pass, but speed of delivery offers no assurance that it will perform as intended. Delim

texfash.com: Delim’s proposition is that visually similar textile components can be technically non-interchangeable. Does the persistence of substitution failures suggest a more basic weakness in textile sourcing: that the industry still tends to purchase materials and components as discrete specifications rather than as parts of an interacting textile system?
Yevhen Hodovaniuk: Yes: treating a specification as the whole requirement can miss the interface with the product. A specification remains necessary, but it must describe how the component is used. A buckle interacts with its mating half, webbing and attachment; a zipper interacts with its slider, tape and sewn construction. The procurement question should therefore include both the part and its interfaces. A visually similar part is a candidate for evaluation, not evidence of interchangeability. We would not infer the prevalence of this problem across the industry from individual sourcing enquiries alone.

From the substitution requests that reach Delim, where is the largest gap between what manufacturers believe constitutes an equivalent component and what actually determines whether that component will perform correctly in production and use?
Yevhen Hodovaniuk: We cannot rank the largest gap statistically. The distinction we consider most useful is between matching a label and matching a function in a defined construction. Nominal size, colour and material name narrow the search; they do not fully identify mating geometry, installation or service conditions. For example, the same nominal zipper size should not be treated as permission to mix slider and chain families. YKK's replacement-slider guidance explicitly limits the relevant slider to specified compatible chains. The practical request should identify the existing assembly, what must remain unchanged and what evidence will establish acceptance.

Ukrainian manufacturers have had to operate under exceptional supply uncertainty. Has that environment changed the hierarchy of sourcing decisions, with availability sometimes preceding technical equivalence, and what has that revealed about the resilience of conventional textile procurement systems?
Yevhen Hodovaniuk: We do not have a dataset establishing how Ukrainian manufacturers' decision hierarchies have changed. Our concern is the decision process under urgency: when availability becomes the first filter, technical suitability still needs a separate approval. A useful resilience measure is to document alternatives before a disruption, with the exact combination, installation conditions and approval scope recorded. Procurement can then distinguish an already qualified alternative from an available but unqualified part. A short delivery time does not make two components equivalent, and uncertainty should be visible in the decision rather than concealed by the word 'replacement'.

Delim identifies mating geometry, dimensions, load path, installation and operating conditions as part of substitution verification. In textile products, how much of component performance can actually be assessed independently of the fabric, webbing, reinforcement, seam construction or coating into which it is incorporated?
Yevhen Hodovaniuk: Part-level evidence can establish identity, dimensions and properties measured under stated conditions. It cannot by itself establish the behaviour of every installed construction. The fabric or webbing, reinforcement, seam placement and assembly process are part of the use case. A useful distinction is 'component conforms to its specification' versus 'this assembly meets the product requirement'. The first supports the second but does not replace it. The manufacturer should evaluate the actual material stack and attachment, particularly when the substitution changes the interface rather than just an independently specified feature.

Technical datasheets can establish composition, dimensions, tensile properties and other measurable parameters. From Delim’s experience, which characteristics most commonly create false confidence because two products can satisfy comparable specifications yet behave differently once sewn, loaded, washed or repeatedly flexed?
Yevhen Hodovaniuk: We would avoid claiming which characteristics cause failures most frequently without measured records. Risk can arise when apparently comparable values were obtained under different methods, conditioning or specimen configurations, or when they omit a relevant behaviour. A component-strength value, for example, does not necessarily describe the strength of its attachment to fabric. A matching material name does not specify every finish or processing limit. Washing, drying and production treatments also need application-specific checks. YKK's usage manual illustrates why care and sewing conditions must be considered alongside the zipper itself; this should not be generalized into one rule for all components.

A substitution may change the behaviour of the surrounding textile even when the replacement component itself does not fail. What kinds of secondary effects—distortion, seam damage, abrasion, altered load distribution, coating damage or accelerated fabric fatigue—tend to be overlooked during component approval?
Yevhen Hodovaniuk: Our recommended review asks what the change could transfer to neighbouring materials. Does a stiffer or differently shaped part concentrate force at an attachment? Does an edge contact fabric during movement? Does the installation require a different hole, seam location or reinforcement? Could a change in tape or material behaviour distort the assembly after the intended care process? These are possible mechanisms to investigate, not a claim that every substitution produces them. Comparing an approved construction with the proposed assembly helps reveal effects that a loose-part inspection cannot show.

Delim recommends documentation and sample testing before serial-production substitution. What would a technically credible qualification process look like when manufacturers have neither the time nor the resources to reproduce the full service life of a textile product before approving an alternative?
Yevhen Hodovaniuk: A credible process starts with the intended function, likely failure modes and acceptance criteria agreed before testing. Compare documentation, build production-representative samples, evaluate the functions and exposures that matter to the application, and record the configuration and results. Compare against the existing approved construction where that provides a meaningful reference. A limited pilot can provide further evidence before a wider release, but neither a pilot nor a short cycling test automatically proves full service life. Where the consequences demand evidence that is not available, the answer is to withhold approval or obtain qualified testing, rather than relax the requirement because supply is urgent.

Yevhen Hodovaniuk
Yevhen Hodovaniuk
Commercial Director
Delim

A useful distinction is 'component conforms to its specification' versus 'this assembly meets the product requirement'. The first supports the second but does not replace it. The manufacturer should evaluate the actual material stack and attachment, particularly when the substitution changes the interface rather than just an independently specified feature.

Delim operates from the supplier side of the transaction. Where should a responsible supplier draw the line between helping a manufacturer identify an apparently suitable alternative and declaring that equivalence cannot be established without testing the customer’s complete textile construction?
Yevhen Hodovaniuk: We separate identifying a candidate from approving an installed product. A supplier can clarify item identity, documented parameters, known application restrictions and missing information, and help arrange samples or manufacturer clarification. The customer remains responsible for defining the finished-product requirement and approving its construction. If the result depends on an untested interface, it is responsible to say that equivalence has not been established. This is not a refusal to help: it makes the next step clear. The recommendation should state which facts are supported and which conclusions still require the manufacturer's validation.

There is an obvious commercial tension here: manufacturers need continuity of supply, distributors need workable alternatives, and technical teams need evidence. When those pressures conflict, what evidence should be considered non-negotiable before Delim is prepared to recommend a substitution?
Yevhen Hodovaniuk: Our selection approach requires an identifiable item, a defined intended use, the relevant interface information and documentation supporting any claimed property. Where suitability depends on the assembly, evidence from that assembly is needed before calling the substitution approved. Unresolved discrepancies should be recorded, together with who owns the approval decision. Commercial pressure cannot turn an assumption into evidence. The depth of testing should match the application and consequence of failure; we would not impose an arbitrary universal test programme or describe a quick successful demonstration as proof of suitability in all conditions.

If genuine interchangeability depends on the interaction between component, textile construction, manufacturing process and end-use conditions, does the industry need to rethink the very idea of an ‘equivalent’ replacement? Should substitution increasingly be treated as a product-validation exercise rather than a procurement decision?
Yevhen Hodovaniuk: Yes: we favour equivalence defined for an application and a recorded set of conditions. Two parts need not be identical to be acceptable alternatives, but the differences must be evaluated against the functions the product needs. Conversely, similarity in a catalogue does not establish equivalence. Procurement identifies and secures the candidate; technical validation establishes the approved use. Both roles matter. A practical outcome is an approval record stating the exact component, mating parts, construction, process and limits, so a later order or change does not silently exceed what was evaluated.

Before Approving a Substitute
  • Hodovaniuk asks whether a stiffer or differently shaped part could concentrate force at an attachment.
  • Reviewers should check whether the edge of a new component contacts the surrounding fabric during movement.
  • A substitute may need a different hole, seam location or reinforcement when it is installed in the product.
  • A change in tape or material behaviour could distort the assembly after the intended care process.
  • Comparing the approved construction with the proposed assembly reveals effects that loose-part inspection cannot show.
What Qualification Needs
  • Function, likely failure modes and acceptance criteria should be agreed before any testing of a substitute begins.
  • Samples should be production-representative, with the configuration and results of each evaluation recorded for later reference.
  • Neither a limited pilot nor a short cycling test automatically proves the full service life of a product.
  • Delim requires an identifiable item, a defined intended use, interface information and documentation supporting claimed properties.
  • Unresolved discrepancies should be recorded in writing, together with a note of who owns the approval decision.

Subir Ghosh

SUBIR GHOSH is a Kolkata-based independent journalist-writer-researcher who writes about environment, corruption, crony capitalism, conflict, wildlife, and cinema. He is the author of two books, and has co-authored two more with others. He writes, edits, reports and designs. He is also a professionally trained and qualified photographer.

 
 
 
Dated posted: 17 November 2026 Last modified: 17 November 2026
 
LATEST SPECIALS
Consumer Returns / Sorting Data
Double Jeopardy / Indian Exports / III
Double Jeopardy / Indian Exports / II
Double Jeopardy / Indian Exports / I
Double Jeopardy / Indian Exports / III
Recycling Crisis / India Project
Functional Fabrics / Wellness
Handmade India / Dokha Story

A Himalayan Winter Garment Sheds Its Wool and Finds a New Life